by B.B. Pelletier
S&W 327 TRR8 is an exciting new BB revolver.
Smith & Wesson’s firearm 327 TRR8 revolver is designed for self defense. The revolver is an 8-shot .357 Magnum revolver that employs a tactical rail, hence the TRR (for tactical rail revolver) designation. I wonder why S&W chose the number 327 for this revolver, because Federal Cartridge Company recently introduced their .327 Magnum cartridge that’s been touted as more effective in the real world than .357 — whatever that means.
The firearm revolver this BB gun copies retails for just a few dollars under $1,300, so you know it has to be a serious handgun! At 40-60 percent more than other models, the 327 must have a lot going for it. Its purpose is to provide a revolver that gives up nothing to the 1911A1, because it holds a similar number of rounds. Remember the comparison is being made with the .45 ACP, not a smaller law enforcement caliber; and .357 Magnum is considered to be equivalent to the big .45 as a man-stopper and superior in other aspects such as penetration. SWAT teams can now choose between a 1911-style semiauto or a revolver.
The firearm frame is made of Scandium, S&W’s lightweight metal that replaces steel. Although its large, it’s lightweight, at 35.3 oz. The BB gun is just a trifle heavier, at 35.9 oz. The firearm comes from the S&W Performance Center and has a custom-tuned trigger, trigger stop and a tuned action. That’s where the extra money goes.
I don’t own a 327 firearm, nor have I ever shot one, so I can’t evaluate the claims that it has the best trigger S&W is currently putting in revolvers or that it handles the recoil of the .357 cartridge more effectively than any other revolver. The closest handgun I have that also handles .357 Magnum recoil is a Desert Eagle pistol, and that comparison would be unfair and unbalanced in every way. This report will have to focus on the BB gun, by itself.
The prototype firearm is a high-capacity revolver, but shockingly the BB gun holds only 6 rounds instead of the 8 promised in the model name. And the size of the BB gun is on the small side. I find the finger grooves are too close for comfort. Instead of an N-frame Smith, this seems like more of a K-frame gun. I find that confusing. Isn’t the whole purpose of the gun to hold 8 shots? But looking at the BB-gun cylinder I can see there isn’t enough metal for any more than 6 rounds, so I must assume that the cylinder on the firearm is larger than the one on the BB gun. But the BB gun is about one full inch longer than the firearm, which I attribute to the angle of the grip that houses the CO2 cartridge.
This revolver has a cylinder that swings out to the left side of the gun when the cylinder catch is pressed forward. And when it is pressed back, the safety is engaged. Once out of the frame, the ejection crane does not come all the way back to fully extract the cartridges from their chambers. It isn’t necessary, because the cartridges do not swell during firing the way firearm cases do. So you can simply tip the muzzle up and the cases will drop from the cylinder on their own.
The spring-loaded breech of the barrel is rounded to fit into the front of each chamber, which is the primary way the cylinder locks during firing. There is a locking bolt that engages the rear of the cylinder, as well, but it doesn’t lock very tightly. It is possible to turn the cylinder in either direction with the gun’s hammer down in the fired position.
There are six brass-bodied “cartridges” that hold one BB each, and they are used to load the gun. They are approximately the same size as a .357 Magnum cartridge, so you get the realism of handling ammo when you load the gun.
The gun comes with a speedloader to hold the cartridges and it will be used to rapidly load each cartridge by pressing all six cartridge “mouths” into a flat pellet tin filled with a layer of steel BBs. When the speedloader is inserted into the cylinder, a central release button is automatically depressed, releasing all six cartridges into the cylinder. Gravity will do the rest and the cylinder can be closed. You may need to practice this move several times to develop a feel for it, but once you do, it seems to work fine.
The sights are fiberoptic on the BB gun. While I don’t like fiberoptics in general on any gun, in this case they work because this isn’t a target gun. It is supposed to be a rapid-acquistion handgun, and these sights support that goal perfectly. All three green dots are bright in nearly any light. Your eye will pick them up quickly, and putting them in a row give you the sight picture you want. So, forget groups on paper targets and think of rolling soda cans. That’s what this gun was designed to do.
Besides the open sights, there’s a Picatinny rail located atop the frame and another under the muzzle. The gun was built for optical sights. I may try that after the conventional accuracy test.
The CO2 fits neatly inside the grip with nothing showing outside. Even the piercing screw is hidden, which is what most buyers say they want.
The gun fires in both the single-action and double-action modes. I’ll describe the trigger-pull in greater detail in Part 2, but for now let me say that, in single-action, it’s relatively crisp; and a single-stage pull in double-action is short and reasonably light.
This revolver is distributed by Umarex. It’s very realistic-looking, even to the matte finish that the firearm has. It will be an interesting gun to test.